Für Elise

It's taken a number of years, but I have finally gotten around to making the book that I started planning as a gift for my child several years ago!

In the ceramics workshop a couple of years ago I created book covers for a small accordion book. I  impressed lace on the clay and used a stamp set to put my name on the back cover before the covers went in the bisque fire. I glazed the covers, brought them home - and forgot about them! I kept remembering my plans to make the gift just before xmas and birthday every year, but never having the time to actually make the gift!

As with my other books using ceramic covers, I knew that I first had to glue some paper to the insides of the covers to ease the affixing of the final accordion drawing. Prior to doing this, I threaded some garden wire through the back holes; this would provide an element with which to close the book.

This year, remembering once again too late, I decided it would just be a late gift and took my time about it. The gift was actually quite simple: the first few bars of Beethoven's beautiful song Für Elise would comprise a transcribed drawing. The only decision I had to make was colour and media.

I drew the piece in pencil first and finally decided on pen and coloured inks. While I was careful in my transcription, I also thought that smudges may lend some authenticity to my drawing so did not pressure myself to be perfect.

Für Elise, 10 cm x 10 cm, accordion-fold book, ink on acid-free papers, ceramic covers, plastic-coated garden wire, 2019.

Sticks - accordion book

I conceived of "Sticks" as a simple accordion book for a single, long format intaglio print with ceramic covers. The print is a horizontal image of sticks based on some sketches I had done of wood debris floating in the Glencullen River in Knocksink Wood.

I had created a unique protype, "Shinrinyoku", of this image as an accordion book in June. I made the prototype to figure out how an accordion book could work, using handmade paper for the drawing and for the covers.

Because I wanted the front cover of the "Sticks" book to have some relationship to the future intaglio print, I created a bark stamp that could be pressed into the clay slabs that would be my book's front covers

The stamp itself was simply made from some scrap wood and the bark affixed to the front of the stamp with pva glue.

Although I coated the entire stamp to seal it, when using it on the clay it worked better to have a layer of cling film (Saran wrap) between the stamp and the clay slab. For the back covers, I simply used a rubber stamp kit to press my name in the clay slabs.

I was doing an edition of ten books, so needed 10 final intaglio prints of the image. I have detailed how I converted a pasta machine into a flatbed press in a previous blog (here). The small prints created using this press are only limited in size in one direction (in this case the length is shorter than the width). The prints are on Khadi 100% acid free handmade Indian rag paper.

When the prints were ready I did a general layout of how I would like the completely open book to appear, with both the front and back covers visible. This would give me an idea of how to fold the book.

Or rather, giving my trusty assistant the idea of how to make the folds (I fully recognise that my husband tends to measure more accurately than I!).

The prints were affixed to the background of Fabriano with pva, along the top only, prior to making the folds.

Components ready to be turned into books!

A view of the back of the accordion book.

A view of the front of "Sticks".

Ghost - accordion book

I conceived of the book Ghost as a complex accordion book vehicle for a series of  prints that utilised the blind embossing print technique (i.e., embossing with no ink or colour added). I have shown images of this technique and the prints on a previous blog a few weeks ago (Oct 4 2017) and full details of how to convert a pasta machine to a small printing press on Sept 20 2017. The main  thing was to methodically go through all the steps in creating the book once I had the prints done. I started with the cover, which is made from heavy weight 100% acid free blotting paper with the title stitched using white embroidery thread (6 strand cotton).

After designing the lettering I used a heavy card template, first poking the holes in it, and then poking through those holes to the blotting paper cover below. Pre-holing the covers made for easy stitching.

Here are several of the covers prior to stitching.

As there were five prints to accommodate, my book required a long background page for folding. I realised I needed to glue two pieces of the Fabriano paper together to create the required length.

Lots of measuring and use of my trusty bone folder!

An accordion page.

I made a clear general layout before going near any pva glue!

I had already glued (pva) squares of thin acid free paper to the front and back covers and weighted them overnight so that they were affixed firmly. I wasn't taking any chances with trying to glue my accordion page to blotting paper covers. The half ends of the accordion page were firmly affixed to the covers via the paper already on the cover.

The Fabriano paper has a front and a back, so where the company sticker was already on the back I left it and marked other pages lightly with a soft pencil. When the book was complete I removed all stickers and gently erased all markings.

Here the books are all together, with the blind embossed prints waiting to be affixed to their ordered part of the accordion.

The finished book with all the prints affixed to their pages.

Preparations...

While I am busy working on the new painting, I am also doing the background preparations for the Sticks n' Stones books I am planning to make in the next few months. I have mentioned this project before: companion books - an accordion book and a stick book. I definitely needed some paper for printing and was delighted to be able to order some Fabriano and Indian rag online from Evans Art Supplies. Along with some other supplies, the items were delivered to me in two days. I was impressed by the careful packing (in fact, extricating the paper packs was a bit Fort Knox-ian!). 

I knew some adjustments had to be made in my pasta machine printer in order for it to handle a long intaglio plate (800 micron acetate). Because of the base on the machine, and the shape of the table it would be clamped to, only a small rectangle plate could be used, so I imagined the base would have to be cut so that it hovered above the floor from a height - a long plate could then go through the machine. The birds eye view shows that the printing plate can go through the press vertically and there is about 3 feet distance to the floor -- plenty of room to accommodate a long plate (though my print won't be THAT long!).

However, and thrillingly so, the base was removable/adjustable such that it could be turned around and hover over the floor without having to make any cutting changes. I just need to use an extra clamp for balance an security. The side view shows how the machine will cantilever from the table.

Accordion and Stick Books

I have my next book-print project in mind for during the summer (after my big painting is finished). One thing I needed to do, though, was whip up a couple of templates for an accordion book and a stick book. These were done really fast to ensure I had the concept right for the book designs, I haven't decided on paper or materials for covers yet.

So first off, I got some thin cardboard for the front and back covers. I recommend having a look at American artist Susan Kapuscinski Gaylord's YouTube channel here - she gives complete, quick instructions on how to make a variety of simple books for various uses. She is also a brilliant calligrapher and artist, using bookbinding within her gorgeous sculptures (have a look at The Spirit Books).

I used some heavy grey paper, folded it and glued the covers on either end. Okay, I have the concept figured out! In 2015, I saw an exhibition of Etel Adnan's work at the Irish Museum of Modern Art, and in a display of small works there was an accordion book, which was opened out to reveal a single painting. This has stayed happily in the back of my mind till now.

I am also planning a stick book for this coming project - the two types of books, with their prints, will be companions.

Again, I have not yet decided on the materials for the pages or covers. It is not likely that I will use acidic cardboard for covers, as I am not planning endpapers (I used 100% acid-free rag endpapers for the Good Morning/Maidgín Mhaigh/Buenos Dias books). However, never say never - it's early days yet!